EVERYTHING YOU NEED TO KNOW ABOUT OUR LED NEON SIGNS
Sign Information, Accessories & Installation Guide
- Low energy consumption
- Lightweight acrylic backboard
- Safe 12V power supply
- Indoor and outdoor options
Additional benefits and features
- Custom designs available
- Fast shipping worldwide
- 3-year warranty included
- Free design consultation
WHAT'S INCLUDED WITH YOUR CUSTOM LED NEON SIGN?
As Standard
- Super Energy-efficient Neon 12V LED strips
- Sleek 6mm premium clear acrylic backboard
- Mains 12V power supply with 1m black power cable
- 2m clear power cable from the sign to the adapter
- Pre-drilled holes + wall mounting kit (screws, stainless steel fixtures & rawl plugs)
- Covered by our 3-year warranty
Optional Extras
- Dimmer Remote & Receiver
- Battery Pack
- Ceiling Hanging Kit
- Waterproofing
- Cable length upgrades
- Coloured stand-off wall fixtures
YOUR SIGN
HOW TO HANG YOUR SIGN
1.Mark out & drill holes
Position the acrylic backing and mark out the holes. Carefully drill holes where marked.
2.Drill 'n' Screw
Drill pilot holes exactly on the points you marked out in Step 1 and insert the rawl plugs. Unscrew the top of the studs from the bottom. Put the screw through the bottom half of the stud and screw into the rawl plug with a screwdriver. Repeat this for all holes.
3.Attach the Bolts
Hold you sign up so that the predrilled holes are matched up with the bottom part of the wall studs. Screw the top half of the wall studs through the predrilled holes into the bottom half.
4.Repeat and Tighten
Your sign should now be sandwiched between the top and the bottom half of the studs. Repeat this for all of the remaining studs. Try not to over tighten them as this can damage the acrylic backing.
5.Plug it in!
You can now plug the dimmer remote receiver into the clear power cable on one end, and the black mains power cable into the other. Once this is done, simply plug in the mains power supply (or battery pack) and you are good to go!
Dimmer Remote Control Guide
- Power On/OFF
- Brightness Dial
- Brightness Selection - Select the brightness of your sign
- Mode Selection - Change between modes such as flashing and pulsing
- Set the speed of the mode selection
